Skip to main content
Classroom PulseClassroom Pulse
Pricing
Trust
About
Sign InCreate Account
Help Center›Intervention tracking

Intervention tracking

Set up an intervention, update its status, and read the observation counts for the baseline and intervention periods.

Plans
Starter and higher
For:
Teachers, BCBAs and specialists, Administrators
Read time
6 min read
Updated
October 27, 2026

On this page

  1. What it is for
  2. Create an intervention
  3. Pause, resume or complete an intervention
  4. Read the effectiveness analysis
  5. Phase change lines
  6. When something goes wrong
  7. Who can use it
  8. Related

What it is for

Intervention Tracking keeps a record of each strategy you try with a student: what it is, how to carry it out, where it applies, and when it was active, paused or completed. It then counts the target behavior entries logged before the intervention started and during it, so the team can review the two periods side by side.

What it does not do

The analysis is descriptive. It shows counts for the baseline period and the intervention period under the heading Effectiveness not established. It does not calculate an effect size, a percentage score or a trend, and it does not decide whether the intervention worked. Review the counts with the student's team before changing a plan.

Create an intervention

Use your current role and an approved demo student

This management workspace requires teacher-level access. If you see Limited Access, you can still read this guide; your assigned-student and logging permissions in other workflows are unchanged. Coordinate setup with the responsible teacher or administrator. Practice only with a designated fictional student, and do not change staff roles to follow the tutorial.

  1. Use Open app screen in this tutorial or open Intervention Tracking. The page heading is Intervention Effectiveness. On a phone, More lists the tools available to your role; use the direct link if this tool is not listed. The link does not grant additional access.
  2. Choose New Intervention. The Create New Intervention page opens. It is a three-step form, not a pop-up.
  3. Basic Information: pick the Student, tick at least one entry under Target behaviors, and add any Replacement skills (optional). Enter an Intervention Name, pick an Intervention Category, and choose a Target Behavior Function if the team has one.
  4. Set Baseline Period (Days). 14 days is the default. Choose No baseline data when there are no earlier entries to compare.
  5. Implementation Details: write a Description, list the Implementation Steps (use Add Step for more), and set Implementation Frequency to Continuous, Scheduled or As-Needed.
  6. Settings & Fidelity Tracking: tick the settings where the intervention applies. Tick Enable Fidelity Tracking only when it is part of the team’s plan, then set a Target Fidelity Percentage agreed by the team. The form starts at 80%; this is a default, not a universal standard.
  7. Check the student, selected behaviors and Summary, then choose Create Intervention once. The new intervention starts as Active. Reopen it from the list to confirm the saved details before adding notes or markers.

The 13 categories are Antecedent Manipulation, Reinforcement-Based, Skill Building, Environmental Modification, Self-Management, Social Skills Training, Sensory-Based, Academic Support, Crisis Prevention, Token Economy, Visual Supports, Break-Based and Other.

Baseline comes from entries you already have

The baseline period looks back at target behavior entries logged before the intervention started. There is no Start Date field and no separate baseline entry form. Use the observation schedule and baseline period agreed by the team. Choose No baseline data when appropriate; do not add or backdate observations just to fill a comparison.

Pause, resume or complete an intervention

  1. On the Intervention Effectiveness page, choose an intervention name to open it. The All tab is selected initially. Use the search box and status/category filters to find it. When looking for a paused intervention, stay on All; the Active and Completed tabs show only their named status.
  2. While the intervention is Active, choose Pause or Complete. A paused intervention shows Resume. Reload the detail page to confirm the saved status. These controls update the intervention record; they do not change the phase tags on existing observations.
  3. A completed or abandoned intervention cannot be restarted. Create a new one if the strategy comes back.
  4. The detail page has Overview, Analysis, Notes and Fidelity tabs. On Notes, enter what changed and why, then choose Add Note. Reopen Notes after reloading to confirm the note saved. Use Fidelity Checks for the separate implementation-check workflow.
  5. Use Complete to keep the record in the Completed list. Archive opens a confirmation: Archive intervention removes it from the list and retains notes, alerts and fidelity history. This workspace has no restore control. Choose Cancel when you only intended to review the record.

Read the effectiveness analysis

  1. On the detail page choose Full Analysis. The Effectiveness Analysis page opens. The Analysis tab on the detail page shows the same evidence.
  2. Read the Baseline period and Intervention period cards. Each shows its dates in Central time, Recorded occurrences, Observation records, Days with records and Frequency records, with Recorded daily totals underneath.
  3. Baseline-phase entries and voided entries are excluded from the intervention totals. Only the target behaviors you selected count.
  4. Choose Refresh Analysis after logging new entries.

Messages you may see:

  • No observations are recorded for this intervention period. Nothing matching the selected target behaviors was logged in the window. Missing observations do not establish zero behavior or improvement.
  • Choose the target behaviors for this intervention before reviewing its observation totals. The intervention was saved without target behaviors, so its counts cannot be scoped. Create a new intervention and select them in Basic Information.
  • The intervention dates need review before observations can be summarized. The saved dates do not form a valid window, so counts cannot be shown.

Phase change lines

Phase change lines are vertical markers on a student's charts that show when something changed. They are included on Essential plans and higher.

  1. On the Effectiveness Analysis page, open the Phase changes disclosure. The Phase Change Lines card lists every marker for the student.
  2. Choose Add Phase Change. Enter the Date, pick a Type, and write a short Label. The label appears on the chart. Description and Color are optional.
  3. Choose Add Phase Change to save, then check the date and label in the list. The selected date is a Central calendar day, matching reports even when your device uses a different time zone. If saving fails, the form stays open with your entries and an error; check access or retry.
  4. Use the marker’s Edit button to correct its date, type, label, description or color, then choose Save Changes. Clearing the description removes it; Reset restores the type’s default color. Reopen the marker to confirm the saved values. Choose Cancel to leave a proposed edit unsaved.
  5. Use the Visible / Hidden control to hide or restore a marker without deleting its history. Reload the page, expand Phase changes again, and confirm the state. Only visible markers appear on supported charts. The creator or a team administrator can edit shared markers; other staff see View only. Delete permanently removes a marker, so prefer hiding it when you only need to declutter a chart.

Swipe sideways on the table to see all columns.

TypeDefault color
Phase Change (general purpose)Gray
Intervention StartedBlue
Intervention PausedAmber
Intervention CompletedGreen
Medication ChangePurple
Setting EventPink

Where markers appear

Visible phase changes appear as program markers on weekly trends, student progress and comprehensive report charts, and on generated behavior report trend exports. Logged Program Phase transitions between Baseline, Active Intervention and Maintenance sync automatic markers here. Repeated entries in one phase do not each create a new transition. A manual marker does not change the phases saved on observations; review those separately in Progress Monitoring.

When something goes wrong

I cannot tick a target behavior
The student has no target behaviors configured yet. Use Open student to configure behaviors on the form, add the behaviors on the student page, then return to the form.
The page says intervention tracking is available on Starter plans and above
This workspace has not confirmed a plan that includes Intervention Tracking. Check your existing team access with the administrator before choosing another plan. Intervention Tracking requires Starter or higher; plan access alone does not grant student or management permissions.
I see a Limited Access notice
Your current role does not include this intervention-management workspace. Assigned-student access and logging permissions still apply in other workflows. Read the guide or choose Return to Daily Log, and coordinate intervention setup with the responsible teacher or administrator. For practice, use an approved fictional workspace with suitable existing access; do not change staff roles.
There is no Phase changes section
Phase change lines are included on Essential plans and higher. Starter plans can track interventions but cannot add markers. If your plan includes markers, open Full Analysis, then expand Phase changes. A disabled edit control can mean the marker belongs to another staff member; ask its creator or a team administrator to review it.
The counts look low
Only entries for the selected target behaviors inside the recorded dates count. Baseline-phase entries, voided entries, and entries with other or invalid measurements are excluded from occurrence totals. Open Recorded daily totals to see which days have records.

Who can use it

  • Intervention Tracking: Starter plans and higher. Team members with teacher-level access can create and manage interventions. Para and viewer roles see a Limited Access notice.
  • Phase change lines: Essential plans and higher, including BCBA Solo.
  • AI intervention suggestions: Practice plans and higher, on the student profile under the Interventions tab next to Behavior Insights. BCBA Solo plans do not include them. Each suggestion carries an ESSA evidence badge with a What is ESSA? link to the ESSA evidence guide. Review suggestions with a qualified professional before using them in a plan.

Related

Quick Log

Log the entries the counts are built from

Reports

Charts that show program markers

ESSA evidence tiers

What the badge on AI suggestions means

Subscription and billing

Plan comparison and upgrades

Was this page helpful?
Classroom PulseClassroom Pulse

Behavior tracking, FBA interviews, and IEP goal drafting for school teams in one secure workflow.

Product

  • Features
  • FBA Interview Generator
  • IEP Goal Generator
  • Pricing
  • Live Demo
  • Templates

Solutions

  • For Teachers
  • For Specialists
  • For Districts

Resources

  • Help Center
  • Blog
  • FBA Guide
  • BIP Guide
  • Data Collection
  • Professional Learning
  • PD Training
  • Q&A

Company

  • About
  • Contact

Legal

  • Trust Center
  • Privacy Policy
  • Terms of Service
  • Subprocessors
  • FERPA Support
  • Security
  • Data Processing Agreement
  • Data Protection
  • Acceptable Use
  • Service Level Agreement
  • Cookie Policy
  • Do Not Sell My Info
Student Privacy First
Encrypted Data
Role-Based Access

© 2025–2026 Classroom Pulse. All rights reserved.

System statusAccessibility